1756-OB16I | Allen Bradley ControlLogix DC Output Modules

Name: 1756-OB16I | Allen Bradley ControlLogix DC Output Modules
Brand: Allen-Bradley
Price: 433600000 IRR
Availability: InStock

برند :

Allen-Bradley

پارت نامبر :

1756-OB16I

زمان تحویل:

5 هفته

به دلیل سفارشی بودن کالاها و نوسانات قیمت ارز، لطفا برای اطلاع از قیمت بروز کالا استعلام بگیرید.

ویژگی ها / Specifications

Model	ControlLogix DC Output Modules
Fusing	Not protected. A fused IFM is recommended to protect outputs
Outputs	16 individually isolated
Attribute	1756-OB16I
Condition	New & Original in Factory Packing
Off to On	1 ms max
On to Off	2 ms max
Pilot duty	2 A (DC-13SQ)
RTB keying	User-defined mechanical
Slot width	1
Module keying	Electronic, software configurable
Wire category	1²
Enclosure type	None (open-style)
Factory Warranty	12 Months
Voltage category	12/24V DC sink/source
Load current, min	1 mA per point
Scheduled outputs	Synchronization within 16.7 s max, reference to the Coordinated System Time
Current draw @ 24V	2.5 mA
Current draw @ 5.1V	350 mA
Thermal dissipation	12.28 BTU/hr
IEC temperature code	T4
Total backplane power	1.8 W
Current per point, max	2 A @ 30°C (86°F); 1 A @ 60°C (140°F) (linear derating)
Power dissipation, max	3.6 W @ 60°C (140°F)
Current per module, max	8 A @ 30°C (86°F); 4 A @ 60°C (140°F) (linear derating)
Surge current per point	4 A for 10 ms per point, repeatable every 2 s
Removable terminal block	1756-TBCH, 1756-TBS6H
Operating voltage range¹	10 30V DC
On-state voltage drop, max	1.2V DC @ 2 A
States in Fault mode per point	Hold last state, On or Off (Off is default)
North American temperature code	T4A
States in Program mode per point	Hold last state, On or Off (Off is default)
Off-state leakage current per point, max	0.5 mA per point

Description / توضیحات

Technical Specifications Output delay time: Isolation voltage: 250V (continuous), basic insulation type, outputs-to-backplane 125V (continuous), basic insulation type, output-to-output Routine tested @ 1350V AC for 2 s NOTE: UL certification for 24V DC nominal. Rockwell Automation specified to 10 30V DC. Use this conductor category information for planning conductor routing as described in the system-level installation manual.