معرفی
جزيیات
خانه/ اتوماسیون صنعتی/ کنترلر/ ماژول پی ال سی/ GE Fanuc/ IC694MDL754 | GE Fanuc RX3i DC Voltage Output Module

IC694MDL754 | GE Fanuc RX3i DC Voltage Output Module
به دلیل سفارشی بودن کالاها و نوسانات قیمت ارز، لطفا برای اطلاع از قیمت بروز کالا استعلام بگیرید.
ویژگی ها / Specifications
| Model | RX3i DC Voltage Output Module |
| Condition | New & Original in Factory Packing |
| Module ID | 0x059h |
| Protection | Short-circuit protection, overcurrent protection, overtemperature protection, all with auto recovery. |
| Rated Voltage | 12/24 volts DC, nominal |
| Group to Group | 250 VAC continuous; 1500 VAC for 1 minute |
| Inrush Current | 3 Amps supplied for 10ms without ESCP trip |
| Output Current | 0.75 Amps per point |
| Product Number | IC694MDL754 |
| Factory Warranty | 12 Months |
| On Response Time | 0.5ms maximum |
| Thermal Derating | No derating at 24VDC. At 30VDC, outputs are derated above 42 degrees C as shown below. |
| Off Response Time | 0.5ms maximum |
| Power Consumption | 300 mA (maximum) from 5 volt bus on backplane; |
| Outputs per Module | 32 (two isolated groups of 16 outputs each) |
| Output Voltage Drop | 0.3 volt DC maximum |
| Output Voltage Range | 10.2 to 30 volts DC |
| External Power Supply | +12 VDC to +30 VDC, 12/24 VDC nominal |
| Output Leakage Current | 0.1mA maximum |
| Module version CC and later | 72 mA/group with all outputs commanded Off, 132 mA/group with all outputs commanded ON |
| Module version BC and earlier | 72 mA/group with all outputs commanded OFF, 100 mA/group with all outputs commanded ON |
| Steady-state overcurrent trip | 5 Amps typical per point |
| Field to Backplane (optical) and to Frame Ground | 250 VAC continuous; 1500 VAC for 1 minute |
Description / توضیحات
Specifications
Isolation:
External Power Supply Current Required (not including load current):
Output Characteristics








