Features
- 0 to 5000 ppm range (0 to 1000 ppm for CO2 applications)
- -97 to 27.3°F (-71 to -26°C) frost point at STP of 25°C
- 0.095 to 237lbs/MMSFC (1.52 to 3,803 mg/m3)
- ±1% of reading or ±2 ppmv, whichever is greater; for > 1000 ppmv, ±5% of reading
- ±3% of reading or ±5 ppm for CO2 applications
- ±0.2 ppmv or ±0.1% repeatability, whichever is greater (±1.0 ppmv or ±0.5% for CO2 applications)
- 102 psig (0.69MPa) process pressure
- 10 to 60 SLH (0.4 to 2 SCFH ); 30 SLH (1 SCFH) nominal sample cell flow rate
- Calibration options: nitrogen, standard natural gas and 3 customizable calibration curves
- NIST or equivalent NMI traceable certification
- Response time <2 seconds
- Three 0/4-20 mA DC (source) analog outputs with 500 ohm load
- Loop powered 4-20 mA input for remote pressure transmitter
- Two programmable digital communications ports with multidrop capability and assignable address, MODBUS RTU protocol
The Panametrics Aurora RM moisture analyzer uses Tunable Diode Absorption Spectroscopy to measure moisture concentration in common gases. Operating over a wide range of environmental conditions, it immediately alerts the user when moisture concentrations are out of compliance. Gas can quickly be cleared for process normalization once corrected. With power and gas lines connected, the Aurora RM moisture analyzer provides a wide range of measurements with accuracy.
